Custom Welding Repair in Houston, TX
Request Your Free Estimate
Houston Repair Welding From Three Rigs and a Spring Shop
BHS Welding LLC does custom welding repair in Houston for plants, contractors, restaurants and homeowners, inside the Loop and out past the Beltway. Cracked equipment frames. Leaking pipe. A dumpster gate the trash truck folded in half. We come to you, fix what broke, and make sure it doesn't break the same way twice.
Brian Steele started the business in Spring in May 1996 with a welder and a helper. Now there are three rigs on the road: Brian's, plus two more run by fabricators who do the same work he does. Commercial, industrial or residential, every call gets the same approach to custom welding repairs.
Heavy Equipment Weld Repair on Houston Job Sites
Heavy equipment is the work Brian names first when you ask what BHS does. Excavator buckets with cracked side plates. Dozer frames with a split weld. Pins and bosses worn out of round. Houston runs on construction and industrial work, and a machine that's down costs somebody money every hour it sits.
We repair it where it sits when we can, and we modify equipment when a job needs it to do something new. Worn metal can often be built back up with hard surfacing instead of being thrown out. There's more on that side of the business on our machinery and equipment parts page.
Pipe and Structural Weld Repair for Houston Plants
Pipe work comes up a lot in Houston. Chilled water lines in commercial buildings, process pipe at plants on the east side, and just about any metal pipe that's cracked, leaking or needs a new run fitted in. We weld it and fit it through our pipe and tube welding service.
Structural steel is the other half. Beams, columns, stair stringers, mezzanine framing, platforms. If it carries load, a custom welding repair on it has to be right the first time, and we treat it that way. Our structural welding page covers the kind of steel we work on.
Houston Repair Work Our Three Rigs Handle
Restaurant Metal Work and Maintenance
Restaurant owners use us as their welding repair service and to keep their metal maintained, so a small problem doesn't turn into a closed day. We can come before open or after the last table turns.
Dumpster Enclosures for Houston Businesses
Bent frames, torn hinges and gates that won't latch. We fix them or build new ones heavy enough to take a daily hit from the truck.
HVAC Frame-Outs
Welded frames and supports for HVAC units, repaired when they rust or crack and built new when the equipment changes.
Fences, Gates, Carports and Awnings
Pipe fence, iron gates, carports and awnings. We repair them, or our metal fabrication shop builds a new one when the old one is done.
Mobile Welding Repair From Downtown to the Ship Channel
Our shop is up in Spring, so most Houston trips start on I-45 or the Hardy Toll Road. Anybody who has driven either one at 5 on a Friday knows why we ask where you are before we promise a time. Once we're there, the rig has everything on board: welder, torch, grinders and steel.
Mobile welding repair saves you from hauling broken equipment across town or pulling a gate off its posts. The torch cutting, the fitting and the welding all get done on site. People searching weld repair near me in Houston usually want somebody who shows up with the right gear the first time, and that's how we run every call.
Residential Weld Repair in Houston Neighborhoods
Older Houston neighborhoods like the Heights, Garden Oaks and the East End have iron that's been out in the weather for decades. Gates drag, porch rails come loose, and fence posts rust off at the ground. Newer subdivisions get the same problems a few years later.
We fix what's there when it can be fixed. That's usually cheaper, and it keeps the look of the house. When it can't be saved, we build a new gate or rail through our gates and railings work. If you found us looking up weld repair near me, you've found a custom welder who will tell you straight whether to fix it or replace it.
Why Houston Contractors and Homeowners Keep Our Number
We've been at this since 1996. BHS is still Brian's shop, and he still answers for the work. He describes the business as honest and reliable, and that's the bar for every custom welding repair in Houston we take on.
Before you hire anybody, ask them why the joint failed. If they can't tell you, the fix won't last. Ask Brian whether he can weld it or build it and you'll get the answer he's been giving for years: yes we can.
Houston Calls Returned Within One Hour, Day or Night
BHS Welding LLC is open 24 hours a day, 7 days a week. Equipment doesn't only break during business hours, and neither does a gate on a Saturday night. If we miss your call, we call you back within one hour.
When the problem can't wait until morning, ask for our emergency welding repairs.
Houston and the Suburbs Around It
We work all over Houston and the towns around it, starting from our shop in Spring:
Spring: our home base on the north side
Humble: northeast, near Bush Intercontinental
Pasadena: east, along the Ship Channel
South Houston: southeast, inside the Beltway off I-45
Pearland: south, down Highway 288
Katy: west, out I-10
Houston Welding Repair Questions, Answered Straight
Do you cover all of Houston?
Yes. From our shop in Spring we run rigs inside the Loop, out past the Beltway and into the suburbs. Call 281-583-1177 and tell us where you are.
Can you repair heavy equipment on a Houston job site?
Yes. Heavy equipment repair is the work we lead with. We fix cracked frames, buckets and brackets on site, and we modify equipment when the job calls for it.
Do you weld pipe?
Yes. We weld and fit pipe, including chilled water lines and just about any other metal pipe.
Do you do structural welding repairs?
Yes. Beams, columns, platforms and stairs. Anything carrying load gets treated like it matters, because it does.
Can you work at a restaurant or store without closing it?
We plan the job around your hours. We're open around the clock, so early mornings and late nights aren't a problem.
What happens if I call after hours in Houston?
We're open 24/7. If nobody picks up, we call back within one hour.
Can you make a part that isn't sold anymore?
Yes. We measure the old part, work from prints if you have them, and build a new one in our shop.
How do I get a quote?
Use the free estimate form at the top of the page or call us. Send photos if you can. They help us tell you what we're looking at.
Schedule Houston Custom Welding Repair With BHS Welding LLC
Plant, job site, restaurant or back yard. Tell us what broke and where it is, and we'll tell you when a rig can be there. Call 281-583-1177.
Or send the details online and we'll call you back.