Custom Welding Repair in Pasadena, TX
Request Your Free Estimate
Pasadena Weld Repair for Plants, Docks and Homes
BHS Welding LLC does custom welding repair in Pasadena for plants, contractors, warehouses and homeowners from Red Bluff Road down to Fairmont Parkway. Cracked skid welds. A pipe support that let go. A dock plate that forklifts have hammered for years. We figure out what failed and why, then weld it to hold up to the work it does.
Brian Steele started BHS in Spring in May 1996 with a welder and a helper. Now it's Brian and two fabricators, each with a rig of his own. Pasadena is a haul from our shop, around Beltway 8 and over the ship channel bridge, so we set the trip up before we leave and tell you honestly when we'll get there. It's the same approach we bring to welding repair all over Houston.
Industrial Steel Repair Along the Pasadena Ship Channel
Drive SH 225 at night and the flare stacks light up the whole east side. Everything around those plants is steel: pipe racks, platforms, stairs, handrails, equipment skids. Heat, vibration and damp air off the channel work on every weld, and the failures show up at the joints first.
We repair the steel that holds industrial work together. Platforms and stairs, handrails, column base plates, brackets and supports. Anything carrying load gets handled as structural welding, with the joint cleaned up and welded full instead of patched over.
Pipe Weld Repair for Pasadena Plants and Buildings
Pipe is a big part of what we do. Process lines, utility lines, chilled water pipe in commercial buildings, and just about any metal pipe that's cracked, leaking or needs a new section fitted in. We weld it and we fit it.
A custom welding repair on pipe starts with finding out why it failed. A crack at a support usually means the pipe was moving where it shouldn't. Fix the support along with the weld, or the crack comes back. Our pipe and tube welding page covers the pipe side of the shop.
Custom Welding Repair Jobs Around Pasadena
Equipment Skids and Heavy Equipment Frames
Heavy equipment repair is the work Brian lists first. Cracked frames, split skid welds, broken brackets and worn parts built back up, on site or in the shop. See our machinery and equipment parts page.
Loading Docks and Warehouse Steel
Dock plates, bumper mounts, pit edges and bay door frames take a pounding from trucks and forklifts. We repair them as part of our industrial and commercial work.
Dumpster Enclosures and HVAC Frame-Outs
Bent dumpster gates, torn hinges and rusted HVAC frames and supports, repaired or built new.
Fences, Gates and Handrails for Pasadena Homes
Sagging driveway gates, loose porch rails and fence posts rusted off at the ground. When one can't be saved, we build a new one through our gates and railings work.
Welding Repair Service for Spencer Highway and Fairmont Parkway Businesses
Pasadena's shopping centers, restaurants and shops line Spencer Highway, Fairmont Parkway and Red Bluff. Calls from that side of town are dumpster gates flattened by the truck, rusted security fence, handrails at entrances and restaurant metal that needs fixing before the next shift.
A good welding repair service works on your schedule. Tell us when the lot is empty or the kitchen is closed, and that's when we'll be there. People who search weld repair near me from a Pasadena storefront usually want it done without closing their doors, and we plan around that.
Mobile Welding Repair at Pasadena Plants, Docks and Driveways
Every one of our trucks is a full rig with a welder, a torch, grinders and steel on board. Mobile welding repair means the fix happens at the plant gate, the dock or the driveway. Nothing has to get hauled anywhere.
When a part isn't sold anymore, a custom welder makes one. We measure what's there, read the prints if you have them, and do our own torch cutting and fabrication. If you found us searching weld repair near me because a machine is down, that's exactly the kind of call we take.
Why Pasadena Plants and Homeowners Call BHS Welding LLC
BHS has been welding for the Houston area since 1996, and it's still owner-run. When you call, you get Brian or one of the two fabricators who work alongside him. Honest and reliable is how Brian sums up the shop.
Industrial work doesn't stop at 5, and neither do we. We're open 24 hours a day, 7 days a week, and missed calls get returned within one hour. When it can't wait, ask for our emergency welding repairs. Ask whether we can handle a custom welding repair in Pasadena and you'll get Brian's usual answer: yes we can.
Pasadena and the East Harris County Towns Next Door
From Pasadena we cover the east side of Harris County:
South Houston: just west, along Spencer Highway
Deer Park: east, along SH 225
La Porte: out Spencer Highway toward Galveston Bay
Galena Park: north, across the Ship Channel
Pearland: southwest, off Beltway 8
Pasadena Welding Repair Questions
Do you take welding repair calls in Pasadena?
Yes. We run rigs out of our shop in Spring across the Houston area, Pasadena and the Ship Channel side included. Call 281-583-1177 and tell us where you are.
Can you repair steel at an operating plant?
We repair platforms, stairs, handrails, pipe and equipment frames at industrial sites. Tell us the site's schedule and we'll plan the job around it.
Do you do pipe welding and pipe fitting?
Yes. We weld and fit pipe, including chilled water lines and just about any metal pipe.
Can you fix equipment on site instead of hauling it in?
Usually. Our rigs carry what we need to repair heavy equipment where it sits. Bigger fabrication gets done in our shop.
Why does steel near the ship channel rust out so fast?
Humidity and damp air off the water work on steel, and welds are where it shows first. We cut back to sound metal before we weld so the repair lasts.
Are you open nights and weekends in Pasadena?
Yes. We're open 24/7, and if we miss your call we call back within one hour.
What if the part I need isn't made anymore?
We build it. We measure the old part, work from prints if you have them, and fabricate a new one.
What do you need from me to quote a Pasadena job?
The free estimate form at the top of this page or a phone call gets it started. Photos of the damage and the site address help most.
Get a Rig Headed to Your Pasadena Job
Plant, dock, storefront or back yard. Tell us what broke and where, and we'll tell you when we can be there. Call 281-583-1177, day or night.
Rather put it in writing? Fill out our contact form and we'll call you back.