Mobile Welding in Spring, TX
Request Your Free Estimate
Spring Is Home Base for Our Welding Rigs
Mobile welding in Spring is the work closest to home for us. Our shop is right here in Spring, and our rigs leave from it for gates, handrails, equipment and pipe all over the north side of Houston.
Brian Steele started BHS in May 1996 with one welder and one helper. It's Brian and two fabricators now, each with his own rig. Calling a mobile welder who's based in town means a shorter drive and a better shot at getting someone to you when something breaks.
Gate and Handrail Repair in Old Town Spring and Older Neighborhoods
Old Town Spring and the older streets off Spring Cypress and Aldine Westfield have a lot of metal built right into the property. Iron gates hung on brick columns. Porch rails set in concrete. Fence that's been painted over five times.
Pulling that out to take it to a shop usually breaks more than it fixes, so we repair it in place. Cracked welds get ground out and redone, loose rails get tightened up, and rusted posts get cut and replaced. A lot of mobile welding in Spring starts with a gate like that. New gates and rails come through our gate and railing fabrication work.
On Site Welding Along FM 1960, I-45 and the Grand Parkway
Spring's businesses line FM 1960, the I-45 feeder, Kuykendahl and the Grand Parkway. Strip centers, service shops, storage yards and small warehouses, a lot of them with tight lots and narrow drive lanes.
On site welding fits there. We park, set up in the space we've got, and fix the dumpster gate, the security fence or the HVAC frame-out without moving anything off the lot. Tell us when it's slow and that's when we'll come. Our custom welding repair service has more on commercial work.
Spring Welding Jobs From Driveways to Equipment Yards
Heavy Equipment Repair and Modification
Brian lists heavy equipment repair first for a reason. Cracked booms, busted buckets, broken brackets and worn edges built back up with hard surfacing. We do it in your yard or at the shop. More on our machinery and equipment repair work.
Pipe Welding and Fitting
Chilled water pipe, process lines and just about any metal pipe need. We weld it and fit it. See our pipe and tube welding page.
Carports, Awnings and Platforms
Metal carports and awnings for homes and businesses, and platforms built or rebuilt to fit.
Custom Metal Pieces
When there's no part to buy, we make one. Bring a print or just the problem. Our metal fabrication starts with figuring out what you actually need.
Rust, Wet Ground and Spring Creek Low Spots
Spring Creek is the line between Harris and Montgomery counties, and the low ground near it stays wet long after a big rain. Steel sitting in that ground rusts from the bottom up. Fence posts go first. Then stair stringers, support legs and anything bolted to a slab that holds water.
We cut out the bad metal and weld in new, and anything carrying real load gets treated as structural welding, not a patch. A good on site welder tells you when a piece is too far gone to save. We will. Fixing rust damage is a steady part of mobile welding in Spring.
Careful Residential Welding Around Finished Spring Homes
Welding next to a house takes care. Brick, siding, paint and landscaping all sit close to the work. We use controlled heat and proper shielding, keep the mess contained and clean up when we're done.
Most homeowners call about gates that drag, rails that wobble or a carport that needs fixing. Small jobs are welcome. That's mobile welding repair the way most of Spring needs it. If you searched welding near me from a house in Spring, our shop may be only a few miles away.
Why Spring Has Called BHS Since 1996
BHS started in Spring and never left. It's a licensed, owner-run shop, and when you call you get Brian or one of the two fabricators who work alongside him. Our mobile welding services cover residential, commercial and industrial work.
We're open 24 hours a day, 7 days a week, and missed calls get returned within one hour. Gate stuck open at 2 a.m.? Trailer broke before a morning job? Ask about our emergency welding repairs.
Honest and reliable is how Brian describes the shop. If you were looking for mobile welding near me and you live in Spring, you've found the welder who's actually here.
Spring and the North Houston Towns Next Door
Besides mobile welding in Spring, our rigs cover:
Klein: southwest, along Kuykendahl and Louetta
The Woodlands: north, up I-45 across Spring Creek
Tomball: west, out FM 2920
Hufsmith: northwest, off Hufsmith-Kohrville Road
Humble: east, past Bush Intercontinental
Conroe: north, up I-45 past The Woodlands
Spring Welding Questions, Answered
Can I bring work to your shop in Spring?
Our shop in Spring isn't open to walk-in customers. We come to you with a rig, and bigger fabrication gets built in the shop and brought out. Call 281-583-1177 to set it up.
Can you repair a gate or railing at my Spring home without removing it?
In most cases, yes. We weld it where it's installed, which keeps it lined up and saves the brick, concrete or post it's set in.
Is it safe to weld next to my house?
Done right, yes. We use controlled heat and proper shielding and keep the work area clean.
Do you work nights and weekends?
Yes. We're open 24 hours a day, 7 days a week.
How soon will I hear back if you miss my call?
Within one hour.
Do you repair heavy equipment in Spring?
Yes. Heavy equipment repair and modification is our lead service. We fix frames, buckets, brackets and worn parts in your yard or at the shop.
How do I know if I need a repair or a replacement?
We'll look at it and tell you straight. If a weld will hold, we fix it. If the metal is too far gone, we say so and build you a new one.
Can you build something from scratch?
Can you build it? Yes we can. Bring a drawing, a print or just the idea.
Call a Spring Welder Who Is Already Close By
Tell us what broke and where, and we'll tell you when a rig can get there. For mobile welding in Spring, call 281-583-1177, day or night.
Or send us a message and we'll call you back.